Http - Xerox B205 User Manual

HTTP

Hypertext Transfer Protocol (HTTP) is a request-response standard protocol between clients and
servers. Clients that make HTTP requests are called User Agents (UAs). Servers that respond to these
requests for resources, such as HTML pages, are called Origin Servers. There can be any number of
intermediaries, such as tunnels, proxies, or gateways between User Agents and Origin Servers.
Note: When configuring settings in Properties, you will be prompted to enter the Administrator
account user name and password. For information about logging in as an administrator, refer to
Accessing the Xerox® CentreWare® Internet Services Administrator
To configure HTTP settings using the printer control panel, refer to
Configuring HTTP Settings Using Xerox
1. In Xerox CentreWare
®
Click HTTP.
2.
3. To enable the protocol, for Protocol, click Enable.
4. For Keep Alive Timeout, enter the time that the printer waits for a response from a connected user
before it terminates the connection.
Note: Increasing the Keep Alive Timeout can cause connections to slow down.
5. Change the Port Number as needed.
Note: If a Machine Digital Certificate is configured, you can edit the following fields.
6. For HTTP Security Mode, select a security option.
To allow connections to the Xerox device using HTTPS only, select Require HTTPS.
Note:
To enable one or more TLS versions, for TLSv 1.0, TLSv 1.1, or TLSv 1.2, select Enable.
7.
8. Click Apply.
Internet Services, click Properties
®
Account.
Network Settings.
CentreWare Internet Services
® ®
Connectivity
 
Xerox B205 Multifunction Printer
®
Network Connectivity
Protocols.
67
User Guide