General Setup; General Setup Using The Printer Control Panel - Xerox B205 User Manual

General Setup

General Setup Using the Printer Control Panel

Machine Setup
1. To access the System Menus, press the Machine Status button on the control panel.
Press the Up/Down arrows to select System Setup and press OK.
2.
3. Press the Up/Down arrows to select Machine Setup and press OK.
The following Machine Setup options and settings are available:
Option
Language
Power Saver Timers
Wakeup Event
System Timeout
Config. Page
Altitude Adj.
Auto Continue
Description
Use this option to set the message
display language.
Use this option to set the time the
printer waits before entering Low Power
Save or Very Low Power Save. Enter
between 0 - 119 minutes.
Use this option to enable the printer to
wake-up when a job is received or a
button is pressed.
Sets the elapsed time before the printer
reverts to default settings.
Enables a report detailing all the
settings to be printed.
Atmospheric pressure, determined by
altitude, can affect print quality. If the
printer is at an elevation greater than
1000 m (3280 ft.), to improve print
quality, you can use Altitude
Adjustment.
Determines whether or not the printer
continues printing when it detects the
paper does not match the paper
settings.
Settings
• English
• List of Available Languages
• Low Power Save
• Very Low Power Save
• On
• Off
• On
• Off
• On
• Off
• Normal: Below 1000 m (3280 ft.)
• High 1: 1000–2000 m (3280–6561
ft)
• High 2: 2000–3000 m (6561–9842
ft)
• High 3: 3000–4000 m (9842–13123
ft)
• High 4: 4000–5000 m (13,123 –
16,404 ft).
• After 30 Sec
• Off
• After 0 Sec
Xerox B205 Multifunction Printer
®
User Guide
General Setup
50