Kohler PRELUDE K-8266T Manual page 6

C. Finish Bath Area Construction
NOTE: An access panel is essential for future
maintenance.
Possible framing arrangements are illustrated below.
Use the framing construction appropriate for your
particular bath model. Some modifications may be
needed for other types of construction, if preferred.
If an apron wall without a ledge is desired, the finished
apron wall surface must be 2 mm under the bath rim.
Recommended For Drop-in Models
1). Corner Installation
The suggested framing construction is illustrated.
1).
2). Recess Installation
The suggested framing construction is illustrated.
2).
3). Peninsular Installation
The suggested framing construction is illustrated.
3).
116867-T01-B
C.
2mm
Service Access
Framing
Construction
Service Access
Framing
Construction
Service Access
Framing
Construction
6
Finished Wall
Wall
Finished Wall
Wall
Finished Wall
Wall