Mitsubishi Electric CNC Specifications And Instruction Manual page 100

Date of revision Manual No.
Jun. 2013 IB(NA)1501068-A
Aug. 2013 IB(NA)1501068-B
Aug. 2016 IB(NA)1501068-C
Revision History
First edition created.
- "WARRANTY" was revised.
- The explanation for CN3 was added to "Twin-head magnetic encoder (MBA
Series)".
- MBA405W was added to "System configuration" and "Cable connection
diagram".
- The motor thermistor cable connection diagram was added to "List of cables
and connectors".
- "Grobal Service Network" was revised.
- Descriptions for MDS-E/EH Series and MDS-EJ Series were added.
- The words "detector" were replaced by "encoder".
- "Precautions for Safety" was revised.
- "System Configuration" was revised.
- "Specifications List" and "Outline Dimension Drawings" were revised.
- "Overload Protection Characteristics" and "Dynamic Brake Characteristics"
were revised.
- "Encoder system options" and "Cables and Connectors" were revised.
- "Selection of the Power Supply Unit" was revised.
- "Installing Twin-head Magnetic Encoder (MBA405W Series)" was revised.
- "Setting the Initial Parameters for the Direct-drive Motor" was revised.
- "Initial Setup for Direct-drive Motor System When Using MBA405W" was
revised.
- "Protective Functions List of Units" was revised.
- "Speed Loop Gain" was revised.
- "Grobal Service Network" was revised.
- Miswrite is corrected.
Revision details