Installation - Mitsubishi Electric CNC Specifications And Instruction Manual

Direct Drive Motor Specifications and Instruction Manual
6 Assembly and Installation

6.1 Installation

DANGER
1. Installation must be done by a qualified technician.
2. Pay attention so that a person with a medical device such as pacemaker won't approach the product. The device may
be affected by the permanent magnets.
3. Do not place magnetic material such as iron close to the product.
4. Before installing, remove metal items such as watch, piercing jewelry, necklace, etc.
5. In installing the product and peripheral structures, make sure to use nonmagnetic tools.
6. Do not leave the product (primary and secondary side) unattended.
7. Immediately stop using the product if any abnormality is found about the product.
8. When multiple operators are engaged in the operation, confirm that no operator is within the range of motion before
energizing the product. If any operator remains in the range of motion, take measures to prevent the motion with
interlock system, etc.
9. As the motor doesn't have the holding power when it is not energized, if you use the product not as a vertical axis, take
measures to prevent the axis from rotating due to gravity.
CAUTION
1. Do not arrange the product, or do not give a shock.
2. Do not get on top of or place heavy objects on the product.
3. Correctly and securely perform the wiring.
Especially, fix the terminals or connectors of the power cables firmly enough.
4. Perform the wiring after installing the product to the machine and device.
5. If iron chips, etc. adhere to the product during installation, completely remove them.
6. Do not install with wet hands.
IB-1501068-C
42