Section 11 − Accessories And Consumables - Hobart Handler 140 Technical Manual

SECTION 11 − ACCESSORIES AND CONSUMABLES
11-1. Accessories
PART NO.
770 187
194 776
195 186
11-2. Consumables
Item
Contact Tips
.023/.025 in (0.6 mm)
.030 in (0.8 mm)
.035 in (0.9 mm)
MIG Nozzle (Standard)
Gasless Flux Cored Nozzle
Tip Adapter
Wire Inlet Guide
Replacement Liners
.023/.025 in (0.6 mm)
.030/.035 in (0.8/0.9 mm)
.035/.045 in (0.9/1.2 mm)
*Available at farm and tool supply retailers.
** Available at Hobart/Miller welding distributors.
11-3. Replacement Drive Rolls
PART NO.
237 338
202 926
246 565
11-4. Regulator/Flowmeter
PART NO.
221 037**
770 198*
212 492**
*Available at farm and tool supply retailers.
**Available at Hobart/Miller welding distributors.
To maintain the factory original performance of your equipment, use only Manufacturer's Suggested
Replacement Parts. Model and serial number required when ordering parts from your local distributor.
TM-258 267 Page 42
DESCRIPTION
Running Gear/Cylinder Rack
Small Running Gear/Cylinder Rack
Protective Cover
Hobart Package Part No.*
770 174 (5 per package)
770 177 (5 per package)
770 180 (5 per package)
770 404
770 487
770 402
—
196 139
196 139
196 140
For All Feed Head Assemblies
WIRE DIAMETER
INCHES (mm)
.023/.025 (.6) and .030/.035 (.8 and .9)
.030/.035 (.8 and .9) and .045 (1.2 VK Groove)
.030/.035 (.8 and .9) V and VK Groove
REMARKS
For Argon and Argon mixed shielding gas. Use with
replacement hose 222 874.
For CO shielding gas. Use with replacement gas hose
2
For One Small Gas Cylinder, 100 lb (45 kg) max.
For One Small Gas Cylinder, 75 lb (34 kg) max.
144 108.
REMARKS
Weatherproof Nylon
Miller Package Part No. **
087 299 (10 per package)
000 067 (10 per package)
000 068 (10 per package)
169 715
226 190
169 716
203 025
194 010
194 011
194 012
Handler 140