Cleaning Or Replacing Gun Liner - Hobart Handler 140 Technical Manual

8-6. Cleaning Or Replacing Gun Liner

1
8 mm
Remove nozzle, contact tip and
tip adapter/gas diffuser.
3
Tools Needed:
8 mm / 10mm
TM-258 267 Page 26
Head Tube
Lay gun cable out straight
before installing new liner.
!
Disconnect gun from unit.
10 mm
Blow out gun casing.
To Reassemble Gun:
Insert new liner.
Install wire outlet guide so that 1/8
in. (3 mm) of liner sticks out. Hand
tighten outlet guide, and then
tighten two full turns more.
Cut liner off so that 3/4 in. (19 mm)
sticks out of head tube.
Install gas diffuser, adapter, contact
tip, and nozzle.
2
Remove liner.
Ref. 246 669-A
Handler 140