15.2.3
Abschließvorrichtung Verfahrschienen
Diese Abschließvorrichtung ist Standard am Einschubrahmen. Bis
zu zwei Vorhängeschlösser können an jeder Seite angebracht wer-
den. Damit wird das Einsetzen eines Leistungsschalters in einen
leeren Einschubrahmen verhindert.
15.2.4
Abschließvorrichtung Handkurbel
Diese Abschließvorrichtung ist Standard am Einschubschalter. Bis
zu drei Vorhängeschlösser können angebracht werden, um zu ver-
hindern, dass ein Leistungsschalter in eine andere Position verfah-
ren wird.
3ZX1812-0WL50-0AN4
8mm
1
2
15.2.3
Locking device for guide rails
This padlock provision is a standard feature of the guide frame. Up
to two padlocks per side can be installed to prevent the insertion of
a circuit breaker in an empty guide frame.
15.2.4
Locking device for racking handle
This padlock provision is a standard feature of a draw-out circuit
breaker. Up to three padlocks can be installed to lock the racking
handle, preventing the circuit breaker from being racked into
another position.
3
max. 8 mm
15 – 26