Static Address For Ipv4 Wans; Pppoe For Ipv4 Wans - ADTRAN SmartRG SR400ac User Manual

If you want to use a different host, in the
APPLY.
To prevent override of the DNS server list, click the

Static Address for IPv4 WANs

1. In the Configuration Method
2. Fill in the fields using the information in the table below.
3. Click APPLY to save and apply your changes.
The fields for this option are explained in the table below.
Field Description
Address Enter the IP address for IPv4 communications (such as 192.168.1.44).
Subnet Mask Enter the IP address for the subnet mask.
Default Route Enter the IP address for the default IPv4 route.

PPPoE for IPv4 WANs

In the Configuration Method
SmartRG Inc., an ADTRAN Compny Proprietary and Confidential. All Right Reserved. © 2019
Hostname field, enter the host name to be included in DHCP requests and then click
white circle
field, select Static Address. The following fields appear.
field, select PPPoE. The following fields appear.
next to Allow DNS Server List Override.
14