Table of Contents
Advertisement
2. Fill in the fields, using the information in the following table. The same fields are used for both 2.4 GHz and 5 GHz
configurations.
3. Click
APPLY
to save your settings.
Field Name
Description
Enabled
This feature is enabled by default. To disable this network connection, click the
TX Power
Select the maximum rate at which transmission is allowed. Options range from 6 dBm (4 mw) to 30 dBm (1000
mw). The default is 24 dBm (250 mw) for the 2.4 GHz radio and 22 dBm (160 mw) for the 5 GHz radio.
Bandwidth Mode
2.4 GHz radio: Select the "high throughput" (HT) bandwidth mode for this device. Options are HT20 and HT40
(MHz). The default is HT20.
5 GHz radio: Select the " very high throughput" (VHT) bandwidth mode for this device. Options are VHT20,
VHT40, and VHT80. The default is VHT80.
Enable Legacy
Click to enable devices with slower transmission rates (using backlevel protocol versions) to communicate via
Rates
the gateway.
Auto Channel
This feature is disabled by default. To enable automatic channel selection , click the
Channel
(Available only when
2.4 GHz radio: Options include Channel 1 (2.412 GHz) - Channel 11 (2.462 GHz). The default is Channel 11
(2.462 Ghz).
5 GHz radio: Options include Channel 36 (5.18 GHz) - Channel 64 (5.32 GHz) and Channel 100 (5.5 GHz) -
Channel 165 (5.825 GHz). The default is Channel 161 (5.805 GHz).
SmartRG Inc., an ADTRAN Compny Proprietary and Confidential. All Right Reserved. © 2019
is enabled) Select the channel for this device.
Auto Channel
white
circle.
white
circle.
59
Hide quick links:
Advertisement
Table of Contents
