1. In the left menu, click
2. To configure how this gateway should operate, in the
appropriate setting. Options are Router and Wireless Access Point. The default is Router.
Warning:
If you change this setting, a notification appears, stating that the gateway will reboot when you click APPLY. The
same message appears if you change back to Router.
3. To configure this gateway as part of a mesh network, in the
appropriate setting. Options are None and Hub. The default is Hub.
4. Click
APPLY
to save your changes.
SmartRG Inc., an ADTRAN Compny Proprietary and Confidential. All Right Reserved. © 2019
System
>
Operating
Mode. The following page appears.
OPERATING MODE
section, click the
INTELLIFI MODE
section, click the
green button
and select the
green button
and select the
89