ADTRAN SmartRG SR400ac User Manual page 19

1. In the left menu, click
2. Click the VOICE tab. The following page appears.
1. To enable the Voice feature, click the
2. Configure the tagging options:
a. In the Tag Mode
and DQTagged. The default is Tagged.
b. If you select Tagged or DQTagged, the
Valid values are 1 - 4079. The default is 4. Enter the P-bit type. Options are 0 - 7. The default is 0.
c. If you select DQTagged, the
that will be accepted and mapped to the specified WAN. Valid values are 1 - 4062. The default is 0.
3. In the IPV4 CONFIGURATION
Address for IPv4 WANs", or "PPPoE for IPv4 WANs".
4. In the IPV6 CONFIGURATION
"Static Address for IPv6 WANs".
5. Click APPLY to save and apply your changes.
SmartRG Inc., an ADTRAN Compny Proprietary and Confidential. All Right Reserved. © 2019
Network > Ethernet WAN. The following page appears, showing the
white circle
field, select the type of tagging that should be performed. Options are Untagged, Tagged,
CVID field also appears. Enter the Customer VLAN ID or the first in a range of CVIDs
section, configure the settings using the information in "DHCP for IPv4 WANs", "Static
section, configure the settings using the information in "DHCPv6 for IPv6 WANs" and
to the right of Enabled.
VLAN and P-bit fields appear. Enter the ID of the appropriate VLAN.
INTERNET tab.
19