Video Analyzer - ADTRAN SmartRG SR400ac User Manual

Hide thumbs Also See for SmartRG SR400ac:
Table of Contents

Advertisement

3. (Optional) To disable the IGMPv2 feature, click the
4. (Optional) To disable the Fast-Leave feature, click the
5. In the
IGMP Joined Groups
bridge ID.
6. Click
APPLY
to save and apply your changes.

Video Analyzer

On this page, you can configure the IP multicast video streams.
1. In the left menu, click
gateway, data about the video stream appears in the bottom section of the page.
2. To enable this feature, click the
3. In the
Mode
field, select the mode. Options are Snoop and Join. The default is Snoop.
4. (Optional) In the
IPv4 Multicast Address
239.255.255.255. The default is 224.0.0.0.
5. Click
APPLY
to save your settings.
SmartRG Inc., an ADTRAN Compny Proprietary and Confidential. All Right Reserved. © 2019
white circle
section, you can view details of the joined groups including IP address, the device name, and the
Network
>
Multicast
>
Video
white circle
to the right of Enabled.
field, enter the IP address. Options range from 224.0.0.0 through
next to
Force
IGMPv2.
white circle
next to
Enable
Analyzer. The following page appears. If video is configured for your
Fast-Leave.
39

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents