Operating Sequence; Load The Laundry; Measure Out The Detergent; Measure Out The Fabric Softener - Zanussi ZWF 1111 W Quick Installation Manual

Operating Sequence

Before the first wash we recommend that you pour 2
litres of water into the main wash compartment
the detergent drawer in order to activate the ECO valve.
Then run a cotton cycle at 95°C, with the machine
empty, in order to remove any manufacturing residue
from the drum and tub.
Pour half a measure of detergent into the main wash
compartment and start up the machine.

1.Load the laundry

Open the door.
Place the laundry in the drum, one item at a time,
shaking them out as much as possible.
Close the door.

2.Measure out the detergent

Pull out the dispenser drawer until it stops. Measure out
the amount of detergent required and pour it into the
main wash compartment
If you wish to carry out the prewash, pour detergent into
the appropriate compartment marked
3.Measure out the fabric
softener
If required, pour fabric softener into the compartment
marked , without exceeding the «MAX» mark.
Close the drawer gently.
of
.
.
4. Switch the machine on and
select the desired programme
Turn the selector dial to the desired programme to
switch the appliance on. The display will show the
duration of the selected programme.
To switch the appliance off turn it to "O" Off position.
The "Start/Pause" button light will start flashing.
5. Select the spin speed or the
RINSE HOLD option
Press the "Spin" button repeatedly, in order to select the
desired spin speed or the
relevant light will light up.
If you select the "Rinse Hold" option, the machine
will stop at the end of the programme with the water still
in the tub.
ZWF 1111 W

6. Select the desired options

Depress the relevant buttons to select the required
options. The corresponding light illuminates.
10
"Rinse Hold" option. The
ZWF 1311 W