Husqvarna TC 250 2012 Specifications - Operation - Maintenance page 79

WARNING!
Do not attempt to ride the motorcycle until
the brake lever or pedal are fully effective.
Pump the brake lever or pedal until the pads
are against the discs.
The brake will not function on the first ap-
plication of the lever or pedal.
BRAKE DISC WEAR
Measure the thickness of each disc at the point where it has
worn the most. Replace the disc if it has worn past the service
limit.
Disc Thickness
DISC STANDARD
Front 3 mm
(0.12 in.)
Rear 4 mm
(0.16in.)
SPECIFICATIONS - OPERATION - MAINTENANCE
SERVICE
LIMIT
2,5 mm
(0.1 in.)
3,5 mm
(0.14in.)
EN - 37