Troubleshooting Minor Problems - Smeg STU8642 Manual

Before starting the dishwasher after prolonged disuse
• Check that there are no deposits of sludge or rust inside the water pipe:
if there are, allow the water to run from the water supply tap for a few
minutes.
• Plug the power cord back into the socket.
• Reconnect the water intake hose and open the tap again.
6.6

Troubleshooting minor problems

In some cases it is possible to remedy minor problems by referring to the
following instructions:
If the program fails to start, check that:
• the dishwasher is connected to the electrical power supply;
• there is no power failure;
• the water tap is open;
• the dishwasher door is properly closed.
• the door won't close > The door latch was released > Use greater
strength to close the door.
If water remains inside the dishwasher, check that:
• the drain hose is not kinked;
• the drain siphon is not obstructed;
• the dishwasher filters are not clogged.
If the dishes do not come out clean, check that:
• the correct amount of detergent has been added;
• there is regenerating salt inside the special container;
• the dishes are being loaded correctly;
• the selected program is suitable for the dish types and their degree of
soiling;
• all the filter are clean and positioned correctly;
• the spray arm nozzles are not obstructed;
• there is no object obstructing the rotation of the spray arms.
WARNINGS
EN
39