2.2.8 Switching Off; 2.2.9 Removing The Dishes - Smeg STU8642 Manual

2.2.8 Switching off

At the end of the program, the dishwasher emits a short beep and the in-
dicator lights of the fourth and fifth program (ref. pr. 4, pr. 5 fig. 2-04) flash.
Turn off the appliance by opening the door and pressing the on/off button
(ref. 1 fig. 2-02).
symbols programs according to the models
If it is necessary to open the door during the washing cycle,
the program will be interrupted, the relative indicator light will
E1
continue to flash and a beep will indicate that the cycle has not
terminated. Wait for about 1 minute before closing the door
and continuing with the program. When the door closes, the
E2
program will start from where it was interrupted. This opera-
tion should be performed only if necessary as it could cause
irregular program performance.
E3

2.2.9 Removing the dishes

E4
At the end of the washing program, wait at least 20 minute
before removing the dishes in order to allow them to cool. To
prevent any water droplets on the upper rack from falling onto
E5
the dishes in the lower rack, empty the lower rack first and then
the upper one.
E6
E7
E8
E9
USER INSTRUCTIONS
Auto
Auto
end
Auto
end
Auto
end
Auto
end
Auto
end
Auto
end
Auto
end
Auto
end
Auto
end
Auto
end
end
Auto
end
end
Sanitized
QuickTime
EN
FIG. 2-04
13