Logging In Using Web Image Monitor; Logging Out Using Web Image Monitor - Ricoh Pro C7100 Operating Instructions Manual

9. Enter a login user name and login password already set on the machine or the server for
user authentication.
Be sure to enter the same login user name and login password that is registered on the machine or
the server.
If you do not enter a valid login user name and login password, printing will not start.
10. Click [OK] to close the [Authentication] dialog box.
11. Click [OK] to close the printing preferences dialog box.
• Depending on the application in use, the properties specified in this procedure may not take effect.
• If you log in using the driver, you do not need to log out when you finish.

Logging In Using Web Image Monitor

This section explains the procedure for logging in to the machine via Web Image Monitor.
1. Open a web browser.
2. Enter "http://(the machine's IP address or host name)/" in the address bar.
3. Click [Login].
4. Enter a Login User Name and Login Password, and then click [Login].
Depending on the configuration of your web browser, the login user name and password might be
saved. If you do not want to save them, configure your web browser's settings so that this
information is not saved.
• For User Code Authentication, enter a User Code in the [Login User Name] box, and then click
[Login].
• The procedure may differ depending on the web browser used.

Logging Out Using Web Image Monitor

This section explains the procedure for logging out the machine via Web Image Monitor.
1. Click [Logout].
• Delete the cache memory of a web browser after logging out.
Logging In the Machine
49