Intended Use; Technical Data; Parts Of The Machine - Festool DURADRIVE DWC 18-2500 Original Operating Manual

CAUTION
Noise generated when working
Risk of damage to hearing
► Use ear protection.
Vibration emission level a
three directions) and uncertainty K measured in
accordance with EN 60745:
DWC 18-2500
DWC 18-4500
The specified emission levels (vibration, noise)
– are used to compare machines.
– They are also used for making preliminary
estimates regarding vibration and noise
load during operation.
– They represent the primary applications of
the power tool.
An increase is possible in other applications,
with other insertion tools or if the machine is
not maintained adequately. Take note of the
machine's idling and downtimes.
4

Technical data

Cordless drywall screwdrivers
Motor voltage
No-load speed*
Torque soft/hard
Tool holder
Max. workable screw length
Weight excl. battery pack
Weight excl. battery pack, incl. depth stop
Weight excl. battery pack, incl. magazine at­
* Speed values based on fully charged battery
pack.
5

Parts of the machine

[1-1] Bit store
[1-2] On/off switch
[1-3] Rotational direction switch
[1-4] AUTO/MAN selector switch
(vector sum for
h
a = 2,8 m/s 2
h
K = 1,5 m/s
2
a = 3,5 m/s 2
h
K=1,5 m/s 2
tachment
3

Intended use

Drywall screwdriver suitable for the following
screwdriving tasks:
DWC 18-2500
– Screwdriving gypsum fibre board to metal
or wooden constructions using drywall
screws with milling ribs
– Screwdriving chipboard/OSB to wooden
constructions with wood screws and chip­
board screws up to a diameter of 5 mm
DWC 18-4500
– Screwdriving plaster boards onto metal
profile bars (≤ 0.88 mm) using drywall
screws with a fine thread
– Screwdriving plaster boards onto metal
profile bars (≤ 2.25 mm) using drywall
screws with a drill point
– Screwdriving plaster boards to wooden
constructions using drywall screws with a
coarse thread
This power tool is suitable for use with BP Fes­
tool battery packs of the same voltage class.
The user is liable for improper or non-in­
tended use.
DWC 18-2500
18 V
0–2500 rpm
7/18 Nm
1/4" DIN 3126/ISO 1173 1/4" DIN 3126/ISO 1173
55 mm
[1-5] Depth stop
[1-6] Bit
[1-7] Insulated gripping surfaces (grey sha­
ded area)
[1-8] Capacity indicator
[1-9] Capacity display button on battery pack
Accessories shown or described are not always
included in the scope of delivery.
DWC 18-4500
18 V
0–4500 rpm
5/14 Nm
55 mm
1.2 kg
1.3 kg
1.6 kg
English
15