Epson WF-2860 Series User Manual page 59

User's Guide
❏ Wi-Fi Direct
Wired LAN Setup:
Set up or change a network connection that uses a LAN cable and router. When this is being used, Wi-
Fi connections are disabled.
Network Status:
Displays or prints the current network settings.
❏ Wired LAN/Wi-Fi Status
❏ Wi-Fi Direct Status
❏ Print Status Sheet
Connection Check:
Checks the current network connection and prints a report. If there are any problems with the
connection, see the report to solve the problem.
Advanced:
Make the following detailed settings.
❏ Device Name
❏ TCP/IP
❏ Proxy Server
❏ IPv6 Address
❏ Link Speed & Duplex
Related Information
"Making Wi-Fi Settings Manually" on page 25
&
"Making Wi-Fi Settings by Push Button Setup (WPS)" on page 26
&
"Making Wi-Fi Settings by PIN Code Setup (WPS)" on page 27
&
"Making Wi-Fi Direct (Simple AP) Connection Settings" on page 28
&
"Printing a Network Status Sheet" on page 38
&
"Checking the Network Connection Status" on page 30
&
"Changing the Network Connection to Ethernet from the Control Panel" on page 40
&
"Making Advanced Network Settings" on page 29
&
Web Service Settings
Select the menus on the control panel as described below.
Settings > General Settings > Web Service Settings
Epson Connect Services:
Displays whether the printer is registered and connected to Epson Connect.
You can register to the service by selecting Register and follow the instructions.
When you have registered, you can change the following settings.
Preparing the Printer
59