Epson WF-2860 Series User Manual page 127

Hide thumbs Also See for WF-2860 Series:
Table of Contents

Advertisement

User's Guide
Registering Multiple Headers for Sending Faxes
You can register up to 21 fax headers as sender information.
1. Select Settings on the home screen.
2. Select General Settings > Fax Settings > Basic Settings.
3. Select Header, tap the Your Phone Number field, enter your phone number, and then tap OK.
4. Select one of the boxes under the Fax Header list, enter the fax header information, and then tap OK.
Related Information
"Basic Settings" on page 146
&
Sending a Fax with a Selected Header
When you send a fax, you can select header information for the recipient. To use this feature, you must register
multiple headers in advance.
1. Select Fax on the home screen.
2. Select Fax Settings > Add Sender Information.
3. Select where you want to add your sender information.
❏ Off: Sends a fax with no header information.
❏ Outside of Image: Sends a fax with header information in the top white margin of the fax. This keeps the
header from overlapping with the scanned image, however, the fax received by the recipient may be printed
across two sheets depending on the size of the originals.
❏ Inside of Image: Sends a fax with header information approximately 7 mm lower than the top of the
scanned image. The header may overlap with the image, however, the fax received by the recipient will not
be split into two documents.
4. Select the Fax Header field, and then select the header you want to use.
5. Select one of the Additional Information options as necessary.
6. Select OK to apply the settings.
Related Information
"Fax Settings" on page 141
&
Sending Different Size Documents Using ADF (ADF Continuous Scan)
If you place different sized originals in the ADF, all of the originals are sent at the largest size among them. You can
send them in their original sizes by sorting and placing them by size, or placing them one by one.
Before placing originals, make the following setting.
Select Fax on the home screen, select the Fax Settings tab, and then tap ADF Continuous Scan to set this to On.
The printer stores the scanned documents, and sends as one document.
Faxing
127

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents