Software Information; Application For Configuring Printer Operations (Web Config); Running Web Config On A Web Browser - Epson SC-F100 Series User Manual

User's Guide

Software Information

This section introduces the software products available for your printer from the Epson website.
Application for Configuring Printer Operations (Web
Config)
Web Config is an application that runs in a web browser, such as Internet Explorer and Safari, on a computer or
smart device. You can confirm the printer status or change the network service and printer settings. To use the
Web Config, connect the printer and the computer or device to the same network.
The following browsers are supported.
Microsoft Edge, Internet Explorer 8 or later, Firefox
* Use the latest version.
Note:
If the administrator password has not been set when accessing Web Config, the password must be set on the administrator
password setting page.
Do not forget the user name and the password. If you forget them, you will need to contact Epson service support.

Running Web Config on a Web Browser

1. Check the printer's IP address.
Select the network icon on the printer's home screen, and then select the active connection method to confirm
the printer's IP address.
To select an item, use the
Note:
You can also check the IP address by printing the network connection report.
2. Launch a Web browser from a computer or smart device, and then enter the printer's IP address.
Format:
IPv4: http://the printer's IP address/
IPv6: http://[the printer's IP address]/
Examples:
IPv4: http://192.168.100.201/
IPv6: http://[2001:db8::1000:1]/
Since the printer uses a self-signed certificate when accessing HTTPS, a warning is displayed on the browser
when you start Web Config; this does not indicate a problem and can be safely ignored.
Related Information
"Printing a Network Connection Report" on page 28
&
Software Information
*
, Chrome
u d l r
buttons, and then press the OK button.
* *
, Safari
90