System Requirements; Regulatory Information; Standards And Approvals - Epson SC-F100 Series User Manual

User's Guide
Important:
c
The ink freezes if left at below -15 °C (5 °F) for a long time. If it does freeze, leave it at room temperature, 25 °C (77
°F), for at least 2 hours.

System Requirements

❏ Windows
Windows Vista, Windows 7, Windows 8/8.1, Windows 10 or later (32-bit, 64-bit)
Windows XP SP3 (32-bit)
Windows XP Professional x64 Edition SP2
Windows Server 2003 (SP2) or later
❏ Mac OS
Mac OS X v10.6.8 or later
Note:
❏ Mac OS may not support some applications and features.
❏ The UNIX File System (UFS) for Mac OS is not supported.

Regulatory Information

Standards and Approvals

Standards and Approvals for U.S. Model
Safety
EMC
This equipment contains the following wireless module.
Manufacturer: Askey Computer Corporation
Type: WLU6320-D69 (RoHS)
This product conforms to Part 15 of the FCC Rules and RSS-210 of the IC Rules. Epson cannot accept
responsibility for any failure to satisfy the protection requirements resulting from a non-recommended
modification of the product. Operation is subject to the following two conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any interference received, including interference that may
cause undesired operation of the device.
To prevent radio interference to the licensed service, this device is intended to be operated indoors and away from
windows to provide maximum shielding. Equipment (or its transmit antenna) that is installed outdoors is subject
to licensing.
Appendix
UL60950-1
CAN/CSA-C22.2 No.60950-1
FCC Part 15 Subpart B Class B
CAN ICES-3 (B)/NMB-3 (B)
121