Epson SC-F100 Series User Manual page 30

User's Guide
a. Error code
b. Messages on the Network Environment
Related Information
"E-1" on page 30
&
"E-2, E-3, E-7" on page 30
&
"E-5" on page 31
&
"E-6" on page 32
&
"E-8" on page 32
&
"E-9" on page 32
&
"E-10" on page 33
&
"E-11" on page 34
&
"E-12" on page 34
&
"E-13" on page 35
&
"Message on the Network Environment" on page 36
&
E-1
Message:
Confirm that the network cable is connected and network devices such as hub, router, or access point are turned
on.
Solutions:
❏ Make sure the Ethernet cable is securely connected to your printer and to your hub or other network device.
❏ Make sure your hub or other network device is turned on.
E-2, E-3, E-7
Message:
No wireless network names (SSID) found. Confirm that the router/access point is turned on and the wireless
network (SSID) is set up correctly. Contact your network administrator for assistance.
No wireless network names (SSID) found. Confirm that the wireless network name (SSID) of the PC you wish to
connect is set up correctly. Contact your network administrator for assistance.
Entered security key/password does not match the one set for your router/access point. Confirm security key/
password. Contact your network administrator for assistance.
Solutions:
❏ Make sure your access point is turned on.
❏ Confirm that your computer or device is connected correctly to the access point.
❏ Turn off the access point. Wait for about 10 seconds, and then turn it on.
❏ Place the printer closer to your access point and remove any obstacles between them.
Network Settings
30