Maintaining The Printer; Checking And Cleaning The Print Head; Checking And Cleaning The Print Head - Control Panel - Epson SC-F100 Series User Manual

User's Guide

Maintaining the Printer

Checking and Cleaning the Print Head

If the nozzles are clogged, the printouts become faint, there is visible banding, or unexpected colors appear. When
print quality has declined, use the nozzle check feature and check if the nozzles are clogged. If the nozzles are
clogged, clean the print head.
Important:
c
❏ Do not open the printer cover or turn off the printer during head cleaning. If the head cleaning is incomplete, you
may not be able to print.
❏ Because print head cleaning uses some ink, clean the print head only if quality declines.
❏ When ink is low, you may not be able to clean the print head.
❏ If print quality has not improved after repeating nozzle check and head cleaning three times, wait for at least 12
hours without printing, and then run the nozzle check again. We recommend to turn off the printer. If print
quality has still not improved, run Power Cleaning. If it has still not improved, contact Epson support.
❏ To prevent the print head from drying out, do not unplug the printer while the power is on.

Checking and Cleaning the Print Head - Control Panel

1. Load A4- or Letter-size paper in the printer.
2. Select Maintenance on the home screen.
To select an item, use the
3. Select Print Head Nozzle Check.
4. Follow the on-screen instructions to print the nozzle check pattern.
5. Check the printed pattern to see if the print head nozzles are clogged.
❏ A:
All lines are printed. Select
Maintaining the Printer
u d l r
buttons, and then press the OK button.
. No further steps are needed.
78