Technical Specifications Of The Wall Housing - Siemens SIPROCESS GA700 Quick Start Manual

Table 11- 5
Climatic conditions
Permissible operating altitude
Permissible ambient temperature and
humidity
11.3

Technical specifications of the wall housing

Table 11- 6
General
Installation position
Weight
Degree of protection
Table 11- 7
Electrical characteristics
Auxiliary power supply
Power consumption
EMC interference im-
munity (electromagnetic
compatibility) during
operation:
Electrical safety
Power unit cable
Table 11- 8
Purging gas pressure
Continuous (recommended)
Continuous (maximum)
Transient (maximum)
Quick Start
Compact Operating Instructions, 05/2018, A5E31805656-06
Rack-mounted enclosure: Climatic conditions
Wall housing: General technical specifications
Wall housing: Electrical characteristics
with one and/or
two OXYMAT 7 /
ULTRAMAT 7
units
with one or two
CALOMAT 7
units
Wall housing: Purging gas pressure
11.3 Technical specifications of the wall housing
3 000 m above sea level sea level
Technical specifications of analyzer modules (Page 123)
Vertical
Approx. 23 kg
IP65 according to EN 60529
100 to 240 V AC (nominal range of use 85 to 264 V)
50 to 60 Hz (nominal range of use 47 to 63 Hz)
Max. 280 VA
in accordance with the standard requirements of
NAMUR NE21 (05/2006) and EN 61326-1 (2013)
in accordance with the standard requirements
NAMUR NE21 (05/2006) and EN 61000-6-
2:2005
in accordance with EN 61010-1, overvoltage category II
Max. Ø 10 mm , max. 3 x 2.1 mm
2
30 hPa above ambient
< 100 hPa above ambient pressure
165 hPa above ambient pressure
Technical specifications
No
2
121