Juniper JATP700 How To Set Up page 7

Configuring the Alternate Exhaust Interface
To configure the alternate exhaust interface:
(Optional) Type No to not to use the alternate exhaust interface for the analysis engine exhaust traffic.
1.
Use the alternate exhaust interface for external connectivity in threat detection.
NOTE: You can configure alternate exhaust interface only for Core or All-In-One appliance.
Configuring the Device Basic Attributes
To configure basic server attributes:
Type Yes if the device is a Core, an All-In-One, or a Manager of Central Managers (MCM) system.
1.
NOTE: If your device is a Traffic Collector, a Secondary Core, or an Email Collector, type No and enter the Core or
All-In-One IP address.
Enter the device name.
2.
Enter the device description.
3.
Enter the device key passphrase.
4.
NOTE: You must enclose white space and \ special characters in double quotation marks.
Copyright © 2018, Juniper Networks, Inc.
How to Set Up Your JATP700 Appliance
7