Audible Signals - Zanussi ZDTS 101 User Manual

End of programme indicator light
Salt indicator light

Audible signals

Audible signals have been introduced to help indicate
which operations the dishwasher is performing.
– end of the washing programme,
– malfunction of the appliance
It is possible to deactivate the audible signals,
using the Programme selection/Cancel but-
ton.
Deactivation/activation of the audible sig-
nals
1. Press the On/Off button. The appliance
must be in setting mode.
2. Press and hold Programme selection/
Cancel button until programme light A
6
Indicator lights
Illuminates when the washing programme has ended.
It also has added functions of visual signalling as:
– the setting of the water softener,
– deactivation/activation of the audible signals,
– intervention of an alarm due to the malfunction of
the machine.
Illuminates when the special salt has run out.
Is never illuminated while a washing programme is
running.
Factory setting: audible signals activated.
flashes and programme light B illuminates
with fixed light.
3. Press Programme selection/Cancel but-
ton again: programme light A becomes
fixed and programme light B starts flashing.
4. After a few seconds:
– programme light A turns off
– programme light B goes on flashing