Load Cutlery And Dishes - Zanussi ZDTS 101 User Manual

Top up the rinse aid indica-
tor (B) becomes clear
Adjusting the dosage of rinse aid
Increase the dose if there are drops of water or lime
spots on the dishes after washing.

Load cutlery and dishes

Sponges, household cloths and any object that
can absorb water may not be washed in the
dishwasher.
• Before loading the dishes, you should:
– Remove all left over food and debris.
– Soften remnants of burnt food in pans
• When loading the dishes and cutlery, please
note:
12
CAUTION!
Never fill the rinse aid dispenser with any other substances (e.g. dishwasher
cleaning agent, liquid detergent). This would damage the appliance.
Open the lid.
Reduce the dose if there are whitish streaks on the
dishes or a bluish film on glassware or knife blades.
Set the dosage level. (The
dose is factory set in po-
sition 4).
– Dishes and cutlery must not impede the
rotation of the spray arms.
– Load hollow items such as cups, glasses,
pans, etc. with the opening downwards so
that water cannot collect in the container
or a deep base.
– Dishes and items of cutlery must not lie
inside one another, or cover each other.
Close the lid and press un-
til it locks.