Audible Signals; Indicator Lights - Zanussi DWS 6947 Instruction Booklet

6. "Delay start" push button
Allows the start of the programme to be
delayed by 3, 6, or 9 hours.
This option is not available with the "Rinse
and Hold" programme.
7. Programme start push button
This is the last push button to press after
having set the programme and closed the
door.
It starts the programme.
8. Programme phase indicator
lights
Each phase is indicated with a symbol:
Prewash/Rinse and Hold
Wash
Rinse
Drying
As soon as you select a washing programme,
all the phases of the chosen programme will
illuminate.
As the programme progresses, only the
phase under way will illuminate.
At the end of the programme the phase
indicator lights turn off.
9.

Indicator lights

Salt
Illuminates when the salt has run out, to
remind you to refill the salt container.
Rinse aid
Illuminates when the rinse aid has run
out, to remind you to refill the rinse aid
dispenser.

Audible signals

Audible signals have been introduced to help
indicate which operations the dishwasher is
performing.
Short "instruction accepted" signal
When any of the push buttons are pressed, a short
audible signal informs you that the machine has
accepted the instruction given.
Long "programme run" signal
A continuous audible signal informs you that the
washing programme is starting.
Intermittent "end of programme" signal
An intermittent audible signal informs you that the
wash programme has ended.
"Alarm" intermittent signal
The machine is fitted with a number of alarm
systems to help you determine the cause of any
problems (see "Something not working"). An
intermittent audible signal informs you that an
alarm is activated.
To deactivate these audible signals, press
simultaneously and keep pressed both "BIO 50°"
and "Quick 50°" push buttons for about 3 seconds,
during this time an intermittent audible signal
informs you that the audible signals have been
deactivated.
SO312
To reactivate these audible signals, press
simultaneously and keep pressed both "BIO 50°"
and "Quick 50°" push buttons for about 3 seconds,
during this time an intermittent audible signal
informs you that the audible signals have been
reactivated.
Both operations (to deactivate or
reactivate the audible signals) must be
carried out before or during a washing
programme performance.
If the dishwasher is switched off after the
deactivation/reactivation of the audible
signals the setting will not be memorised.
5
BIO
APP99en