Audible Signals - Zanussi ZDT200 User Manual

156997470en.qxp 12/27/2006

Audible signals

Audible signals have been introduced to help
indicate which operations the dishwasher is
performing.
- end of the washing programme,
- malfunction of the appliance.
Deactivation/activation of the audible signals
1. The dishwasher must be switched off.
Switch on the dishwasher by pressing the On-Off
button.
2. Press and hold Programme/Cancel button until
programme light A flashes and programme light
B illuminates with fixed light.
3. Press Programme/Cancel button again:
programme light A becomes fixed and
programme light B starts flashing.
4. After a few seconds programme light A turns off,
programme light B goes on flashing and End of
cycle light illuminates with fixed light.
The illumination of the End of cycle light means
that the audible signals are active.
6
4:35 PM Page 6
Factory setting: audible signals activated.
5. To deactivate the audible signals, press the
Programme/-Cancel button, the End of cycle
light turns off indicating that the audible signals
have been deactivated.
6. To memorise the operation, switch off the
dishwasher by pressing the On-Off button.
7. To reactivate again the audible signals, follow the
instructions till point 4. Wait a few seconds and
then press the Programme/Cancel button, the
End of cycle light illuminates indicating that the
audible signals have been reactivated.