Connecting A Desktop Computer - Toshiba TDP590 Manual

S e t t i n g
NOTE: If you are connecting an
older Macintosh computer that
does not have a 15-pin
connector, you must use the Mac
adaptor between the computer
and the PR-Cable.
NOTE: The projector must be
turned on to display the image
on your monitor.
10
u p t h e

Connecting a Desktop Computer

1 Locate the cable that connects your monitor to your computer.
Unplug it from the computer.
2 Plug the
on your computer.
F 9
IGURE
Connecting the PR-Cable cable to a desktop computer
Do you want to display the image on your computer's monitor as well as on
the projection screen?
1 Plug your monitor's cable into the
Do you want to play your computer's audio on the projector?
1 Unplug the audio cable, if present, from your computer.
2 Plug either end of the PR-Cable audio cable into the audio connector
on your computer.
3 Plug the other end of the audio cable into the
PR-Cable.
P r o j e c t
end of the PR-Cable cable into the monitor connector
o r
connector on the PR-Cable.
connector on the