Toshiba TDP590 Manual page 24

U s i n g t
NOTE: To control the
computer's mouse from the
projector's remote or keypad,
you must connect the mouse
cable to the PR-Cable. See
page 8 for details.
18
h e P r o j
F 13
IGURE
Remote control
Press anywhere on the edge of the disk mouse to move the cursor on the
screen. You can move the cursor at any angle by pressing the corre-
sponding edge of the disk. The mouse button on the top of the remote
simulates your computer's right mouse button; the button on the bottom
simulates your computer's left mouse button. See "Using the Keypad
and Remote Buttons" starting on page 20 for a description of the four
function buttons.
If you are creating presentations in Microsoft
use the remote's mouse buttons to navigate through your presentation
while in Slide Show mode. To configure PowerPoint for this, choose
Options from the Tools menu, click the View Tab, de-select the "Popup
Menu on Right Mouse Click" option in the Slide Show section, then
click OK. Then, when you're in PowerPoint's Slide Show mode, a left
click advances to the next slide and a right click returns to the previous
slide (other PowerPoint modes are not affected).
e c t o r
left mouse button
(on underside of remote)
disk mouse
right mouse button
®
PowerPoint
®
, you can