Setting Up Cala Trio; Positioning And Fastening Cala Trio - Cala Health Cala Trio CT1-STR Health Care Professional Manual

5.0

SETTING UP Cala Trio™

View instructional videos at my.CalaTrio.com
Setting up Cala Trio is as simple as 1, 2, 3...
1. Positioning and fastening it on your wrist
2. Calibrating
3. Setting therapy intensity

5.1 Positioning and Fastening Cala Trio

Positioning and fastening Cala Trio on your wrist
correctly is important to therapy success.
•
Check your delivery ticket to verify the size and
handedness of the band.
•
It is essential that the Cala Trio Stimulator and Band
be snapped together correctly. If they become
detached, align the half circle cut outs on the back of
the stimulator and band as you attach them together.
Step 1: Dampen entire wrist circumference with ample
amounts of water before positioning Cala Trio
•
This ensures a good connection between the electrodes
and wrist.
•
Never submerge Cala Trio in water.
•
If there is any excess oil or lotion on your wrist, wash
with soap and water and rinse well before wearing
Cala Trio.
LBL-5122 Rev C NOV 2019
™
Questions about Cala Trio? Visit CalaTrio.com/HCPFAQs
Step 2: Insert your prescribed hand through the band
making sure the MAIN button points toward the
elbow—not the hand
Step 3: Center the stimulator on the back of your wrist—
as close to the hand as possible without hindering
wrist movement
Note:
Correct placement of the Cala Trio Band electrodes
is essential to therapy success.
Step 4: Ensure that the blue mark on the band is aligned
with the center of the inside of your wrist and
that the white mark is in line with your thumb.
Reposition if necessary
Step 5: Pull the end of the Cala Trio Band to tighten—
fasten the Velcro securely and tightly
8