M Enu System - Kenwood KRC-459R Instruction Manual

M enu Syst em
To accommodate a greater number of functions, a menu sys-
tem has been employed for making settings. Press the M ENU
button to enter the menu mode and then display the function
to make the setting. Details on each setting are explained
separately in the corresponding function page.
1
Hold dow n the M ENU button for one second or more.
"M ENU" is displayed w hen the menu mode is entered.
The function that you can adjust is indicated w ith the current
settings displayed.
2
Selecting function to set
Press the ¢ button to search through the functions until you
see the one you w ant to adjust in the display.
Press the 4 button to search through the functions back-
w ard.
Example: If you w ant to sw itch the tuning mode from manual
to automatic, first search through the functions until
you see "M ANUAL" in the display.
3
Changing setting for currently displayed function
Press either the AM or FM button.
The setting w ill change for each function.
Example: The tuning mode w ill sw itch from manual to auto-
matic, and "AUTO" is displayed.
With the programme type function and the auto memory func-
tion, the function w ill start to activate.
N OTE
To use the auto memory function, hold dow n either the AM or
FM button for tw o seconds or more.
Downloaded from: http://www.usersmanualguide.com/
Function
Disabled System Indicator
Selectable Illumination
New s Bulletin Function
Local seek
Selecting Tuning M ode
Auto M emory Entry
* AF Function
* Region Restrict Function
* Auto TP Seek
* M onaural Reception
* Programme Type
4
Ending the menu mode
Press the M ENU button.
N OTE
• M ake sure to end the menu mode w hen finished.If you fail to end
the menu mode, several functions may not operate properly,
including the Traffic Information function,the New s Bulletin func-
tion w ith PTY new s timeout setting, and the Alarm function.
• Some tuner functions w ill not be displayed unless you are cur-
rently listening to the tuner.
• Functions marked w ith an asterisk (* ) cannot be used during
AM reception.
• The New s function turns on w hen the setting is made for the
new s interruption interval. The "00M " display indicates the set -
ting selected for the new s interruption timeout interval.
— 9 —
Varieties of settings for
each function (display)
↓
DSI ON ↔ DSI OFF
↑↓
COL GRN ↔ COL AM B
↑↓
NEWS 00M ↔ NEWS OFF
↑↓
LO.S ON ↔ LO.S OFF
↑↓
AUTO ↔ M ANUAL
↑↓
A-M EM ORY (start)
↑↓
AF ON ↔ AF OFF
↑↓
REG ON ↔ REG OFF
↑↓
ATPS ON ↔ ATPS OFF
↑↓
M ONO ON ↔ M ONO OFF
↑↓
PTY (PTY mode entered)
↑