Traffic Information Function; Presetting Volume For Traffic Information/New S - Kenwood KRC-459R Instruction Manual

Turning Region Restrict Function On/ Off:
1
Hold dow n the M ENU button for one second or more.
"M ENU" is displayed and the menu mode is turned on.
2
Press the ¢ button repeatedly until the Region restrict func-
tion appears in the display.
Press the 4 button to search in the other direction.
The function setting is indicated by "REG ON" or "REG OFF" in
the display, indicating that the function is on or off, respective-
ly.
3
Sw itching settings
Press either the AM button or FM button.
The display and setting w ill change.
4
Press the M ENU button to end the menu mode.
N OTE
Sometimes stations in the same netw ork broadcast different pro-
grammes or use different programme service names.
Traf f ic Inf orm at ion Funct ion
You can listen to traffic information. If you are listening to
tapes or discs, they w ill continue playing until a traffic bulletin
is broadcast.
Turning TI function On/ Off:
Press the TI button to turn the function on and off.
When the function is on, the TI indicator is turned on.
When a traffic information station is being received, the TP
indicator w ill turn on. When none is being received, the TI indi-
cator w ill blink on and off.
When a traffic bulletin begins to be broadcast, the TA indicator
w ill turn on, and reception w ill begin at the preset volume.
If you are listening to a tape or disc w hen a traffic bulletin
begins, they w ill automatically be turned off. When the bul-
letin ends or poor reception is experienced, the tape or disc
w ill begin playing again.
Downloaded from: http://www.usersmanualguide.com/
N OTE
Pressing the TI button w hilst in the M W/LW band automatically
sw itches reception to the FM band. How ever, the M W/LW band
is not returned to w hen the TI button is pressed again.
Sw itching to a Different Traffic Information Station:
Use the 4 / ¢ buttons to make an auto seek of the TI sta-
tions in a certain band.
N OTE
• When you are listening to a tape or disc, you cannot change to
another TI station.
• When the auto TP seek function is turned on and reception
starts to w eaken, the tuner automatically seeks stations w ith
better reception.
• If you are tuned to a station that is not a traffic information sta-
tion itself but w hich provides EON services, you can still have
traffic information received. The EON indicator lights up w hen
EON signals are being received.
Preset t ing V olum e f or Traf f ic Inf orm at ion/N ew s
Preset the volume level to be used for traffic information and
new s broadcasts.
1
Tune into the station for w hich you w ant to set the volume.
2
Adjust the volume to the desired level.
3
Hold dow n the VOL ADJ button for tw o seconds or more.
The volume level blinks once in the display to indicate that the
data has been stored.
Future traffic information/new s broadcasts are heard at the
preset level.
N OTE
• The volume cannot be low ered by this function during tuner
reception. The volume is only set w hen it is louder than the lis-
tening volume of the tuner.
• You can arrange only to listen to traffic information or new s bul-
letins w ith at preset volume w ith the volume set at minimum.
— 15 —