Loudness; M Enu System - Kenwood KRC-PS959R Instruction Manual

Basic operations

Loudness

This function amplifies low and high tones w hen the volume
is turned dow n.
The LOUD indicator lights up, w hen the loudness function is
on.
Turning Loudness On/ Off:
Hold dow n the LOUD button for one second or more to sw itch
the loudness on and off.
M enu Syst em
To accommodate a greater number of functions, a menu
system has been employed for making settings. Press the
M ENU button to enter the menu mode and then display the
function to make the setting. Details on each setting are
explained separately in the corresponding function page.
1
Hold dow n the M ENU button for one second or more.
"M ENU" is displayed w hen the menu mode is entered.
The function that you can adjust is indicated w ith the current
settings displayed.
2
Selecting function to set
Press the ¢ button to search through the functions until you
see the one you w ant to adjust in the display.
Press the 4 button to search through the functions
backw ard.
Example: If you w ant to sw itch the tuning mode from AUTO1
to manual, first search through the functions until
you see "AUTO 1" in the display.
MENU AUTO 1
3
Changing setting for currently displayed function
Press either the AM or FM button.
The setting w ill change for each function.
Example: The tuning mode w ill sw itch from AUTO 1 to AUTO
2. Pressing the button again sw itches the setting to
manual, and "M ANUAL" is displayed.
AUTO 2
Downloaded from: http://www.usersmanualguide.com/
(See page 5)
AUTO 1
for KRC-PS959R
for KRC-859R/C/W,759R
MANUAL
4
Ending the menu mode
Press the M ENU button.
N OTE
• M ake sure to end the menu mode w hen finished.
If you fail to end the menu mode, several functions may not
operate properly, including the Traffic Information function, the
New s Bulletin function w ith PTY new s timeout setting, and the
Alarm function.
• The New s function turns on w hen the setting is made for the
new s interruption interval. The "##M IN" display indicates the
setting selected for the new s interruption timeout interval.
• The "##" display indicates the setting value.
— 10 —