Unit Dimensions - York SUNLINE 2000 2000 Technical Manual

036-21564-003-A-1005

UNIT DIMENSIONS

(Direct-Drive Units)
Unitary Products Group
(BCH - 3, 4 & 5 TON)
OUTDOOR COIL
All dimensions are in inches. They are sub-
ject to change without notice. Certified di-
mensions will be provided upon request.
UTILITIES ENTRY DATA
KNOCKOUT
HOLE SIZE
(DIA.)
Control Wiring
A 7/8" *
(Side or Bottom)**
Power Wiring
B 2" *
(Side or Bottom)
*Knockouts in the bottom of the unit can be located by the slice
in the insulation.
**
Do not remove the 2" knockout ring.
CLEARANCES
Front 24"
12" (Less Economizer)
Back 36" (With Economizer or Fixed
24" (Less Economizer)
Left Side (Filter Access)
36" (With Economizer)
Right Side (OD Coil) 24"
1
Below Unit
2
Above Unit 72" (For Outdoor Air Discharge)
NOTE:
Units and ductwork are approved for zero clearance to combustible materials when
equipped with electric heaters.
1
Units may be installed on combustible floors made from wood or class A, B or C
roof covering material.
2
Units must be installed oudoors. Overhanging structures or shrubs should not
obstruct outdoor air discharge outlet.
RETURN AIR
SUPPLY AIR
OUTDOOR
OUTDOOR
AIR
(Economizer)
USED FOR
Air/Motorized Air Damper)
20"
15