Planet WBS-202N User Manual page 87

802.11 n 300mbps outdoor wireless cpe

Hide thumbs Also See for WBS-202N:

Table of Contents

User Manual of WBS-202N/WBS-502N

Step2. In AP-2, change the PtP switch to slave, the default IP is 192.168.1.100.

Step 3. In AP-1, go to "Wizard" to configure it to AP Mode. In AP-2, configure it to Repeater Mode.

AP-1

AP-2

Step 4. In AP-2, press Scan AP to search the AP-1. You can also enter the MAC address, SSID, encryption and

bandwidth if you know what they are.

-79-

Table of Contents

Wbs-502n