Table of Contents
Advertisement
User Manual of WBS-202N/WBS-502N
send an RTS frame to the destination wireless node, and the latter will
reply with a CTS frame, and thus they are ready to communicate. The
default value is 2346
RTS Threshold
Enable or Disable RTS/CTS protocol. It can be used in the following
scenarios and used by Stations or Wireless AP.
1) When medium is too noisy or lots of interferences are present. If the
AP/Station cannot get a chance to send a packet, the RTS/CTS
mechanism can be initiated to get the packet sent.
2) In mixed mode, the hidden node problem can be avoided.
The default value is 2347
Dial Switch
Enable or Disable physical PtP switch
Terminal Fast Roam
Enable or Disable 802.11k, 802.11v and 802.11r
-40-
Advertisement
Table of Contents
