Eq Modes; Advanced Mic Settings - Shure MV7 User Manual

Use the monitor mix slider to adjust how much of each source you can hear. For best results, start monitoring at the midpoint
and adjust.
• Move the slider towards the microphone icon (Mic) to hear more of the audio going into the mic. Like when you're singing
over a recorded guitar track and want to clearly hear your voice.
• Move the slider towards the device icon (Playback) to hear more of the track playing back. When you're recording a har-
mony to your original vocal track and want to clearly hear the original performance.

EQ Modes

Use the equalizer to boost or cut bands of frequencies to improve sound clarity. Tap Flat to return to an unchanged equalisation
state.
Mode Characteristics
A completely unprocessed signal (no equalization settings used).
Flat
High-pass filter to reduce proximity effect.
High-
pass
Equalization that emphasizes clarity and fullness.
Presence
boost
High-
Combination high-pass filter and presence boost to improve definition and focus on clarity
pass
presence
boost

Advanced Mic Settings

Fine-tune your sound with limiter, compression, and equalizer settings.
Limiter
Toggle the limiter on or off to prevent distortion from volume peaks in your recording.
Shure Incorporated
10/18