Table of Contents
Advertisement
MV7 Yoke Assembly
The MV7 yoke allows a podcaster to be flexible with mic placement. Loosen the yoke knobs and you can adjust the micro-
phone in a variety angles. If the microphone becomes detached from the yoke, these are the steps to put it together in the cor-
rect order to ensure that your microphone is secure. Each side uses one thin gray spring washer, one shiny silver brass wash-
er, two black plastic washers and the yoke and threaded yoke knob.
1.
Start with the threaded knob flat side down on your tabletop.
2.
Stack the washers on the threaded knob.
◦
Place a black plastic washer on the knob.
◦
Place one side of the yoke on next.
◦
Then put the second black plastic washer on.
◦
Place the flat silver washer and then the thin spring washer on the threaded knob.
Typical Polar Pattern
Overall Dimensions
Shure Incorporated
15/18
Hide quick links:
Advertisement
Table of Contents
