Zooming The Image; Using The Cursor On A 3D Image; Saving Waypoints - Lowrance Elite FS 7 User Manual

84
F
Zoom panel buttons
G
Contrast

Zooming the image

You can zoom the image by using the display specific zoom
options.
If the cursor is active, the system zooms in where the cursor is
positioned.

Using the cursor on a 3D image

By default, the cursor is not shown on the image.
On a 3D image, select the Cursor Enable panel button to use the
cursor.
When the cursor is positioned on an image, the cursor information
window and the history bar are activated.
The cursor information window shows available data at the cursor
position, including the distance and range from the vessel to the
cursor position.
The history bar is used to pan back in the stored data. The
highlighted part of the History bar shows the image you are
currently viewing in relation to the total image history stored. Refer
to "Viewing image history" on page 86.
Ú Note:
The history bar can be turned off. Refer to "Clear live history"
on page 88.

Saving waypoints

To save a waypoint, position the cursor on the panel and then select
the new waypoint menu option.
3D Sonar | ELITE FS User Manual