Acknowledging a message
The alarm dialog options for acknowledging a message vary
depending on the alarm:
•
Close
Sets the alarm state to acknowledged. The siren/buzzer stops
and the alarm dialog is removed.
However, the alarm remains active in the alarm listing until the
reason for the alarm has been removed.
•
Disable
Disables the current alarm setting. The alarm does not show
again unless you turn it back on in the alarm settings dialog.
There is no time-out on a message or the siren. They remain active
until they are acknowledged or until the reason for the message is
rectified.
Alarm settings
You enable or disable the alarm siren from the alarm settings dialog.
This dialog also give access to the settings dialog from where you
enable or disable all system alarms.
Alarm dialogs
The alarm dialogs are activated from the Alarm settings dialog or by
selecting the Alarm button on the toolbar.
Alarms| ELITE FS User Manual
165