Zooming The Image; Using The Cursor On The Image - Lowrance Elite FS 7 User Manual

64
For more information on how to select the source for a panel, refer
to "Source" on page 68.

Zooming the image

To zoom the image:
• Press the +/- keys.
• Select the range (+/-) buttons.
• Use the range menu setting.
When zooming in, the sea floor is kept near the bottom of the
screen.
If the cursor is active, the system zooms in where the cursor is
positioned.
Zoom bar
The zoom bar (A) is displayed when you zoom the image.
Drag the zoom bar vertically to view different parts of the water
column.

Using the cursor on the image

When you position the cursor on the image the screen pauses, the
depth at the cursor position is shown, and the information window
and the history bar are activated.
Measuring distance
The cursor can be used to measure the distance between the
positions of two observations on the image.
1.
Position the cursor on the point from where you want to
measure the distance
2.
Select the measure menu option
Ú Note:
The measure option is not available unless the cursor is
placed on the image.
3.
Position the cursor on the second measuring point
- A line is drawn between the measuring points, and the
distance listed in the Cursor Information window
4.
Continue selecting new measuring points if required
Use menu options to re-position the start point and the end point
as long as the measuring function is active.
Sonar | ELITE FS User Manual