Exchanging Preset Stations - Yamaha RX-V863 Owner's Manual

FM/AM tuning
Press E PRESET/TUNING/CH l / h (or
3
8 PRESET/CH k / n) repeatedly to select a
preset station group and number (A1 to E8)
while the MEMORY indicator is flashing.
• Press E h (or 8 k) to select a higher preset
station group and number.
• Press E l (or 8 n) to select a lower preset station
group and number.
A1:FM 88.9MHz
The displayed station has been stored as A1.
y
You can select the preset station group (A to E) by pressing
D A/B/C/D/E (or 8 A-E/CAT. l / h) repeatedly.
Press F MEMORY (or 9 MEMORY) while
4
the MEMORY indicator is flashing.
The station band and frequency appear in the front
panel display with the preset station group and
number you have selected. The MEMORY indicator
disappears from the front panel display.
Notes
• Any stored station data existing under a preset station number is
cleared when you store a new station under the same preset
station number.
• The reception mode (stereo or monaural) is stored along with
the station frequency.
56
En

■ Exchanging preset stations

You can exchange the assignments of two preset stations
with each other. The example below describes the
procedure to exchange preset station "E1" with "A5".
1
Flashes
MEMORY
2
3
4
Before performing the following operations, set the operation
mode selector on the remote control to F SOURCE and then
press 4 TUNER.
Select preset station "E1" using D A/B/C/D/E
and E PRESET/TUNING/CH l / h.
See "Using station preset feature" on page 54.
Press and hold B EDIT for more than 3
seconds.
"E1" and the MEMORY indicator flash in the front
panel display.
E1:FM 88.9MHz
Flashes
Select preset station "A5" using D A/B/C/D/E
and E PRESET/TUNING/CH l / h.
"A5" and the MEMORY indicator flash in the front
panel display.
See "Using station preset feature" on page 54.
A5:FM 88.9MHz
Flashes
Press B EDIT again.
"EXCHANGE E1-A5" appears in the front panel
display and the assignments of the two preset stations
are exchanged.
Flashes
MEMORY
Flashes
MEMORY