Yamaha RX-V863 Owner's Manual page 112

Using multi-zone configuration
Operate the following operations after activating the Zone 2
operation mode.
Operating Zone 2
Rotate the R INPUT selector to select the
desired input source while the ZONE2 indicator
is flashing in the front panel display.
• Select "TUNER" as the input source to use the TUNER
features in Zone 2. For details about the TUNER
operations, see "FM/AM tuning" on page 53.
• Select "XM" as the input source to use the XM
Satellite Radio features in Zone 2. For details about the
XM Satellite Radio operations, see "XM Satellite
Radio tuning" on page 59.
• Select "SIRIUS" as the input source to use the SIRIUS
Satellite Radio features in Zone 2. For details about the
SIRIUS Satellite Radio operations, see "SIRIUS
Satellite Radio™ tuning" on page 64.
• Select "V-AUX" as the input source to use iPod
features or Bluetooth features in Zone 2. For details
about the iPod operations, see "Using iPod™" on
page 70 or "Using Bluetooth™ components" on
page 72.
Set Zone 2 to the standby mode
Press H ZONE 2 ON/OFF to set Zone 2 to the
standby mode.
y
Press L SYSTEM OFF to set the main zone and Zone 2 to the
standby mode simultaneously.
■ Setting the remote control to the Zone 2
mode
The remote control is originally set to the main mode to
control the main zone. To control Zone 2 with the remote
control, you must first set the remote control to the Zone 2
mode.
Press 2 CODE SET using a ballpoint pen or
1
a similar object.
The B TRANSMIT indicator on the remote control
flashes twice.
CODE SET TRANSMIT
POWER POWER STANDBY POWER
TV AV
108
En
2
■ Controlling Zone 2 with the remote
Turning on Zone 2
Press and hold D POWER or C STANDBY and
then press 4
Zone 2 mode.
• Press D POWER when the main zone is turned on.
• Press C STANDBY when the main zone is turned off.
The B TRANSMIT indicator on the remote control lights
up while the remote control is set to the Zone 2 mode.
• When the remote control is set to the Zone 2 mode,
• The remote control automatically exits from the Zone 2 mode in
Activating the Zone 2 operation mode
Press D POWER to turn on Zone 2.
TRANSMIT
Operating Zone 2
Flashes
Press one of the input selector buttons ( 4 ) to
select the desired input source of Zone 2.
Setting Zone 2 to the standby mode
Press C STANDBY to set Zone 2 to the standby
mode.
Press the numeric buttons ( 6 ) to enter the
code number "9992".
PROG ENHANCER SUR. DECODE
1 2 3
STRAIGHT PURE DIRECT PARAMETER
5 6 7
MULTI CH IN AUDIO SEL
9 0
control
to set the remote control to the
While holding
POWER
down
or
STANDBY
Notes
D POWER, C STANDBY, E VOLUME +/–, G MUTE, and
4
the input selector buttons (
However, the rest of the remote control buttons remain in the
main mode.
the following cases:
– when you do not make any operations within 10 seconds after
the remote control is set to the Zone 2 mode.
– when you press a remote control button other than
D POWER, C STANDBY, E VOLUME +/–, G MUTE, the
A SCENE buttons and the input selector buttons (
4
TRANSMIT
8
Flashes
TRANSMIT
PHONO
Lights up
) are set to control Zone 2.
4
).