Yamaha RX-V863 Owner's Manual page 39

Press 8 k and then 8 ENTER to display the
10
setup results in detail.
AUTO SETUP
. RESULT
SP :
DIST: 14.0/17.0ft
LVL : -9.0/+6.5dB
> SET CANCEL
[ ]/[ ]:Up/Down
[ENTER]:Detail
RESULT
FRONT L;;;;;;;OK
[ [
[ ]/[ ]:Select
[ENTER]:Return
11
Press 8 l / h repeatedly to toggle between
the setup result displays.
Press 8 k / n to toggle between the parameters in a
results.
Results of the speaker
connection and wiring
(WIRING)
Results of the speaker distance
from the listening position
(DISTANCE)
Results of the setting of each
speaker size
(SIZE)
Results of the parametric
equalizer of each speaker
(EQ)
Results of the speaker output level
(LEVEL)
y
If you are not satisfied with the results or want to manually
adjust each parameter, use "MANUAL SETUP" (see
page 82).
3/4/0.1
WIRING
Optimizing the speaker setting for your listening room (YPAO)
Notes
• The distances displayed in the "DISTANCE" results may
be longer than the actual distance depending on the
characteristics of your subwoofer.
• In the "EQ" results, different values may be set for the
same frequency to provide finer adjustments.
Press 8 ENTER to return to the top
12
result display.
AUTO SETUP
RESULT
SP :
DIST: 14.0/17.0ft
LVL : -9.0/+6.5dB
.
SET CANCEL
>
[ ]/[ ]:Up/Down
[ENTER]:Enter
13
Make sure the pointer is pointing at "SET"
and "CANCEL" and then press 8 l / h to
select "SET" or "CANCEL".
AUTO SETUP
RESULT
SP :
DIST: 14.0/17.0ft
LVL : -9.0/+6.5dB
.
SET CANCEL
>
[ ]/[ ]:Up/Down
[ENTER]:Enter
Choices: SET, CANCEL
• Select "SET" to confirm the "AUTO SETUP"
results.
• Select "CANCEL" to cancel the "AUTO SETUP"
results.
Press 8 ENTER to confirm your selection.
14
The following screen appears. Disconnect the
optimizer microphone from this unit. The optimizer
microphone is sensitive to heat. Keep it away from
direct sunlight and do not place it on top of this unit.
AUTO SETUP
AUTO SETUP Complete
Disconnect Microphone
PRESS [ENTER]
[MENU]:Exit
3/4/0.1
3/4/0.1
35
En