Manual Station Preset - Yamaha RX-V863 Owner's Manual

■ Automatic station preset
You can use the automatic preset tuning feature to store up
to 40 FM stations with strong signals (A1 to E8: 8 preset
station numbers in each of the 5 preset station groups) in
order.
(U.S.A. model only)
You can use the automatic preset tuning feature to store up
to 40 AM HD Radio, FM HD Radio, and analog FM radio
stations with strong signals.
Rotate the R INPUT selector (or press
1
4 TUNER) to select "TUNER" as the input
source.
(U.S.A. model)
Press C BAND (or 7 BAND) to select the
2
desired reception band.
"FM" or "AM" appears in the front panel display.
This unit searches the stations in the selected band
and then another band.
(Canada model)
Press C BAND (or 7 BAND) to select "FM"
2
as the reception band.
"FM" appears in the front panel display.
Press and hold F MEMORY (or
3
9 MEMORY) for more than 3 seconds.
The preset station number as well as the MEMORY
and AUTO indicators flashes. After approximately 5
seconds, automatic presetting starts from the current
frequency and proceeds toward higher frequencies.
A1:FM 88.9MHz
Flashes
When automatic preset tuning is completed, the
MEMORY indicator disappears.
y
• You can specify the preset number from which this unit stores
FM stations. Press D A/B/C/D/E (or 8 A-E/CAT. l / h) and
then E PRESET/TUNING/CH l / h
(or 8 PRESET/CH k / n) repeatedly after you perform step 3
to select the preset station number under which the first station
will be stored.
• To cancel the automatic station preset, press F MEMORY (or
9 MEMORY) again.
Notes
• (U.S.A. model only)
When this unit stores the FM HD Radio stations with this
feature, this unit stores only the main audio program of the
stations (HD1). When you want to store the sub-audio programs
of the FM HD Radio stations, preset the stations manually.
• Any stored station data existing under a preset station number is
cleared when you store a new station under the same preset
station number.
• If the number of received stations does not reach 40 (E8),
automatic preset tuning automatically stops after searching for
all the available stations and copy the stored stations to the rest
preset station numbers.
• (Canada model only)
Only FM stations with sufficient signal strength are stored
automatically by automatic preset tuning. If the station you
want to store is weak in signal strength or an AM radio station,
tune into it manually and store it as described in "Manual
station preset" below.

■ Manual station preset

Use this feature to store the AM or FM stations with weak
signals manually.
(U.S.A. model only)
You can store the analog AM/FM radio stations and AM/
FM HD Radio stations manually, and you can also store
the sub-audio programs of FM HD Radio station.
1
2
Flash
MEMORY
AUTO
Tune into a station.
See page 53 for tuning instructions.
y
(U.S.A. model only)
To store a sub-audio program of the HD Radio station (HD2
to HD8), press 0 PRG SELECT b / a repeatedly to
select the desired audio program (see page 57).
Press F MEMORY (or 9 MEMORY).
The MEMORY indicator flashes in the front panel
display for approximately 30 seconds.
MEMORY
Flashes
y
To cancel the preset memory mode, press F MEMORY (or
9 MEMORY) again.
FM/AM tuning
55
En