Operation - Siemens SIMOGEAR BA 2030 Operating Instructions Manual
Gearbox
Hide thumbs
Also See for SIMOGEAR BA 2030:
Table of Contents
Advertisement
Operation
Malfunctions can cause injuries or gearbox damages
In the event of changes during operation, the drive component must be switched off
immediately.
Determine the cause of the fault using the fault table (Page 57). Remedy faults or have
faults remedied.
Check the gearbox during operation for:
• Excessive operating temperature
• Changes in gear noise
• Possible oil leakage at the housing and shaft seals
Preconditions for smooth, vibration-free operation
Observe the maximum permissible vibration values specified in DIN ISO 10816-3 during
operation. Avoid inadmissible vibration levels caused by imbalance, for example (drive output
element), external vibration or any resonance over the complete speed range.
BA 2030 (2KJ4)
Operating Instructions, 07/2020, A5E50009094A/RS-AL
CAUTION
6
55
Advertisement
Table of Contents
